OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2C41

Fan 3 Performance/Stuck Off

P2C41 judges the outcome rather than the wiring: fan 3 is commanded on and its circuit checks out (otherwise P0482, P0695 or P0696 would appear), yet the controller sees little or no response, usually through speed feedback from a fan module or a missing current draw. No manufacturer publicly documents this code. Audi's 2022–2023 e-tron GT shows what tends to be behind such faults: road debris entering through the wheel housing liner jammed the radiator fans, logged there under P2B30/P2B32. Porsche renewed corroded engine-compartment blowers in pairs on the 2017 911 after a fan failure warning. CARB asks for outputs to be checked for functional response where feasible. Rising temperatures under load follow. Speed deviations are P2CBB/P2CBC.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / numberC / 41

Possible causes

  • Fan blades blocked by dirt, stones or leaves high
  • Worn or seized fan motor, corrosion from moisture medium
  • Fan control module does not drive the motor medium
  • Weak power or ground supply to the fan low

Symptoms

  • Engine temperature climbs in traffic or under heavy load
  • Weak air conditioning at standstill
  • Warning lamp or fan failure message

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P2C41

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 4 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication