P2C3C
Cylinder Head Temperature Sensor B Circuit Intermittent/Erratic
P2C3C is stored when the head temperature signal of sensor B drops out briefly or jumps in steps that no mass of hot metal could follow, while the samples on their own may still lie within the valid window. Loose terminals, a wire that touches ground only over bumps or with engine movement, corrosion in the plug and a cracked thermistor are the usual culprits. No manufacturer publicly documents P2C3C; Ford's bulletins for this sensor family deal with P2C38 and P2C39 and point to PCM software. California rules require engine component temperature sensors used for emission control to be monitored much like the coolant sensor. Wiggling harness and plug while watching live data is the most revealing check. A fault that stays low or high stores P2C3A or P2C3B instead.
Possible causes
- Loose or spread terminal in the sensor B connector high
- Harness rubbing on engine parts and shorting only at times medium
- Corrosion in the plug medium
- Cracked sensor element low
Symptoms
- Check engine light that comes and goes
- Jumping head temperature B in live data
- Occasional fan runs or brief warnings without real overheating
Inspection / repair
- Difficulty: medium
- DIY: possible
What Pro shows you for P2C3C
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 2 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.