P2C3B
Cylinder Head Temperature Sensor B Circuit High
With P2C3B the voltage from cylinder head temperature sensor B stays above the valid ceiling, which the module would have to read as a head far colder than any real engine. An interrupted signal wire, a lost sensor ground, a terminal that has backed out of the plug or a thermistor cracked by heat cycling are the typical finds. No manufacturer publicly documents the code. For sensor A, Ford's 2024 OBD summary sets the high-input code above 4.96 V lasting 5 s. With the head temperature gone, the engine control falls back on coolant temperature or a default, may run the fans as a precaution and can keep warm-up settings longer than needed. Measure the voltage at the unplugged sensor first. The ground short case is P2C3A, the general circuit fault P2C38.
Possible causes
- Open signal wire or terminal pushed out of the connector high
- Sensor return (ground) circuit open or high resistance medium
- Thermistor of sensor B broken internally medium
Symptoms
- Live data shows head temperature B at the lowest possible value
- Check engine light
- Fans run more often, idle and warm-up behaviour unusual
Inspection / repair
- Difficulty: medium
- DIY: possible
What Pro shows you for P2C3B
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 2 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.