P2C39
Cylinder Head Temperature Sensor B Range/Performance
P2C39 flags a second cylinder head temperature sensor, B, whose voltage is electrically valid but whose reading does not fit the engine's state, for instance a value that jumps, lags or disagrees with other temperature inputs. Ford is the documented user, all on EcoBoost engines: TSB 24-2441 and its successor 26-2217 (F-150 2.7 L, 2024–2025) pair it with P1299 or P1285 and an over-temperature warning while fan and coolant are fine; a 2024 truck with P2C39 gets new PCM software, the CHT sensor is renewed only if P1285/P1299 persist. TSB 24-2393 (2025 Explorer/Aviator 2.3/3.0 L built to 15 Oct 2024) and 25-2206 (Bronco/Ranger 2.7 L built to 17 Mar 2025) also cure it by reprogramming. Out-of-range voltages are P2C3A/P2C3B.
Possible causes
- PCM calibration misjudging sensor B (Ford EcoBoost bulletins, cured by reprogramming) high
- Sensor B drifted or responding slowly medium
- Sensor not seated properly in the head or corroded terminals low
- Genuine local overheating from low coolant or trapped air low
Symptoms
- Engine over-temperature warning although the gauge and coolant level look normal
- Check engine light, often together with P1299 or P1285
- Reduced power while the fail-safe cooling strategy is active
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P2C39
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 4 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.