OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2C38

Cylinder Head Temperature Sensor B Circuit

A cylinder head temperature sensor is an NTC thermistor seated in the head metal that tells the module how hot the engine really is, even without coolant. P2C38 is the general circuit fault of a second such sensor, B: the signal is open, shorted or otherwise unusable, without separating low from high (P2C3A/P2C3B do that, P2C39 judges plausibility). Ford uses it on the 2025 Explorer and Aviator with 2.3 L or 3.0 L EcoBoost: TSB 24-2393 (built until 15 Oct 2024) describes an over-temperature warning with P1299 plus P2C38 or P2C39 although fan and coolant are fine, and cures it by reprogramming the PCM. For sensor A Ford's 2024 summary flags below 0.244 V or above 4.96 V after 5 s. CARB treats head temperature sensors used for emission control like coolant sensors.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / numberC / 38

Possible causes

  • PCM software causing false faults (Ford 2025 Explorer/Aviator, TSB 24-2393) high
  • Loose or corroded connector at the head sensor medium
  • Failed head temperature sensor B medium
  • Heat-damaged or chafed wiring near the cylinder head low

Symptoms

  • MIL and engine over-temperature warning
  • Fail-safe cooling mode with reduced power possible
  • Temperature warning even though coolant level and fan are fine

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P2C38

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication