OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2C36

Crankcase Pressure Sensor B Circuit Intermittent/Erratic

P2C36 covers a crankcase pressure sensor B signal that drops out briefly or jumps faster than real crankcase pressure can change, while staying mostly inside its electrical range. That pattern points to a contact that opens for moments, a wire chafing on the engine, moisture in the plug or a sensor failing internally. No manufacturer documents P2C36 publicly: Maserati's bulletin on the blow-by sensor lists only P2C33–P2C35 for sensor B, and Ford's gasoline summary has no erratic code for its sensor A either, whose counterpart would be P051E. The description therefore rests on CARB, which requires inputs used by monitors to be checked for circuit faults and plausibility. A shake test of the harness while watching live data is the usual way to find the cause.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / numberC / 36

Possible causes

  • Loose or fretting contacts at the sensor or an intermediate connector high
  • Wire rubbing on engine parts and shorting briefly medium
  • Moisture or oil in the connector medium
  • Sensor with intermittent internal fault low

Symptoms

  • MIL that may come and go
  • Erratic crankcase pressure value in live data
  • Usually no driveability change

Inspection / repair

  • Difficulty: medium
  • DIY: possible

What Pro shows you for P2C36

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 2 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication