P2C34
Crankcase Pressure Sensor B Circuit Low
Circuit Low means the voltage from crankcase pressure sensor B stays under the lowest value the sensor can deliver, typically because the 5 V reference is missing, the signal wire is shorted to ground or the sensor itself has failed. Maserati's bulletin MAS002969/A for MY21 Quattroporte, Ghibli and Levante with the F160 V6 or F154 V8 lists P2C34 next to the sensor-A codes P051B–P051D. Its checklist covers harness continuity and insulation, bent or corroded pins at sensor and ECM, the intermediate signal connection, and about 5 V between pins 1 and 2 at the sensor plug; the sensor sits on bank 1 of the V6 and bank 2 of the V8. As a yardstick, Ford sets the sensor-A low code P051C below 0.44 V after 5 s. While stored, the crankcase ventilation leak check is blocked.
Possible causes
- 5 V reference open or shorted to ground high
- Signal wire shorted to ground or chafed insulation medium
- Crankcase pressure sensor B internally failed medium
- Bent or corroded pins at sensor or ECM low
Symptoms
- MIL on
- Other sensors on the same 5 V supply may report faults too
- Usually no driveability change
Inspection / repair
- Difficulty: medium
- DIY: possible
What Pro shows you for P2C34
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 2 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.