OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2C33

Crankcase Pressure Sensor B Circuit Range/Performance

P2C33 means crankcase pressure sensor B delivers a signal inside its electrical limits that the engine module finds implausible, such as an offset from ambient pressure with the engine stopped or values a running engine cannot produce. Two bulletin families name it. Alfa Romeo reprograms both engine control modules of the 2.9 L V6 biturbo in the 2021–2022 Giulia and Stelvio (18-043-23, 18-007-25) because software set P2C33 among other codes; the later issue mentions limp-in. Maserati's MY21 bulletin MAS002969/A for its F160 six-cylinder and F154 eight-cylinder asks for a software update first when P2C33 is the only code, then checks the sensor, harness and blow-by valve; cold weather may play a part. For sensor A Ford sets P051B above a 0.15 inHg offset at rest or implausible pressure at low air flow.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / numberC / 33

Possible causes

  • Engine control software needing an update (Alfa Romeo and Maserati V6/V8) high
  • Sensor offset or drift, partly due to moisture or ice in the port medium
  • Faulty blow-by (PCV) valve producing abnormal crankcase pressure medium
  • Harness or pin resistance shifting the signal low

Symptoms

  • MIL on, often together with other PCM codes
  • Limp-in mode possible on affected Alfa Romeo models
  • Otherwise usually no driveability change

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P2C33

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 4 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication