OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2C32

Crankcase Pressure Sensor B Circuit

A crankcase pressure sensor tells the engine module how the pressure in the crankcase ventilation compares with ambient, mainly so it can detect a disconnected or leaking breather line. P2C32 is the general circuit fault of sensor B: its signal is missing or cannot be decoded at all, without saying high or low. No manufacturer documents this exact code publicly. Ford shows the pattern for sensor A: on digital SENT sensors, invalid frames or signal patterns set P051A within 5 s, while analogue sensors report the range, low and high codes. Maserati lists the B codes P2C33–P2C35 for the blow-by sensor of its 2021 V6 and V8, but not P2C32. CARB requires the ventilation system to be monitored; with the sensor down that check cannot run, so the MIL is to be expected.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / numberC / 32

Possible causes

  • Unplugged, loose or corroded sensor connector high
  • Open or chafed wire between sensor and engine module medium
  • Sensor electronics failed medium
  • Engine module input or software fault low

Symptoms

  • MIL on
  • Crankcase ventilation leak check not available
  • Usually no change in driveability

Inspection / repair

  • Difficulty: medium
  • DIY: possible

What Pro shows you for P2C32

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 2 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication