P2C31
Ignition Coil Primary Circuit Fuse B
P2C31 is the second of two fuse checks in the coil primary supply: the fuse B group of coils has lost voltage, or the module believes so. GM's patent on this monitor counts how often the current through the fuse falls below a threshold within a set number of samples before it declares the fuse open, then flags a service warning and stops fuel to the unfired cylinders. Stellantis lists P2C31 together with P2C30 for the 3.0L Hurricane I6 in the 2025 Ram 1500 and the 2023–2024 Wagoneer/Grand Wagoneer; later bulletins such as 08-136-26 and 08-194-26 add misfire codes P0300–P0306 and catalyst codes P0420/P0430, and the fix remains a reflash of the ignition system control module, partly with the PCM. A truly blown fuse usually means a shorted coil or chafed feed.
Possible causes
- Ignition system control module calibration (Stellantis 3.0L Hurricane) high
- Shorted ignition coil in group B blowing the fuse medium
- Chafed coil feed wire shorting to ground low
Symptoms
- Check engine light
- Engine misfires or hesitates
- Catalyst codes may follow
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P2C31
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.