P2C2E
Turbocharger/Supercharger Bypass Valve B Supply Voltage Low
P2C2E concerns the power stage of compressor bypass valve B, not its position signal. Such valves are moved by a small DC motor driven through an H-bridge, and the bridge reports when its own supply sags below a safe level. No manufacturer documents the B-side code publicly. GM's 2019 LT5 tables describe the equivalent for valve A (P2BBF): the motor driver flags low voltage in 80 of 100 checks spaced 12.5 ms apart, enabled at relay voltage of at least 11 V without cranking, Type A. NXP's MC33926 data sheet shows how a bridge of this kind disables its outputs under undervoltage and signals the fault. A weak battery feed, a poor module ground, a corroded relay or an internal driver fault are typical causes; the valve then remains in its last position.
Possible causes
- Weak battery or voltage drop on the module feed high
- Poor ground or corroded relay contacts in the supply medium
- Internal fault of the H-bridge driver low
Symptoms
- Check engine light
- Valve no longer responds, boost reduced
- Often accompanied by other low-voltage codes
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P2C2E
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.