OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2C2D

Turbocharger/Supercharger Bypass Valve B Position Exceeded Learning Limit

Electrically positioned compressor bypass valves have their end stops relearned regularly so that the sensor reading can be converted into a true opening. P2C2D means that for valve B, belonging to the second charger, a learned stop came out beyond the allowed window. No manufacturer documents the B-side code. GM shows the routine for valve A on the 2019 Corvette ZR1: once the engine is switched off, the module first drives the valve closed and stores the reading, which must lie between 85 and 95 %, then the open stop, expected between 10 and 20 %; a value outside sets P2BBE immediately as Type A, provided no sensor or circuit fault is active. Deposits, a bent flap, gear wear or a shifted sensor are typical causes. A repair is only confirmed after the next key-off learn.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / numberC / 2D

Possible causes

  • Carbon or oil deposits preventing the valve from reaching its stop high
  • Worn actuator gear or loose sensor magnet medium
  • Valve replaced without relearn or with incorrect part low

Symptoms

  • Check engine light after a key-off
  • Boost control less precise, possible surge noise

Inspection / repair

  • Difficulty: hard
  • DIY: shop recommended

What Pro shows you for P2C2D

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 4 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication