P2C2C
Turbocharger/Supercharger Bypass Valve B Position Sensor Circuit High
P2C2C flags a position signal from compressor bypass valve B that rises above the plausible top of its range, close to the sensor reference. A signal line touching 5 V or battery voltage, a broken ground wire or a defect inside the sensor are the typical findings. No manufacturer publishes P2C2C. GM's A-side counterpart P2BBD on the 2019 LT5 Corvette shows the pattern: a reading above 95 % in 10 out of 14 checks, one every 100 ms, relay voltage at least 11 V, no cranking, Type A. An Achates Power patent explains why a trustworthy reading matters: the controller compares commanded and measured opening to judge the valve. Unlike P2C29, the valve itself may still work; only its feedback is lost.
Possible causes
- Signal wire shorted to reference or battery voltage high
- Open ground of the position sensor medium
- Position sensor failed high medium
Symptoms
- Check engine light
- Boost limited by the engine module
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P2C2C
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.