P2C2B
Turbocharger/Supercharger Bypass Valve B Position Sensor Circuit Low
With P2C2B the position signal of compressor bypass valve B lies below the lowest value a healthy sensor delivers. Likely reasons are a signal wire grounded against the engine, an open 5 V reference or a sensor that has failed low. For valve B no public manufacturer data exist. For valve A, GM's 2019 Corvette ZR1 (supercharged LT5) shows how such a test is built: a raw reading under 10 % of the reference in 10 of 14 samples taken 100 ms apart, only with relay voltage of at least 11 V and the engine not cranking, gives a Type A fault with immediate MIL (P2BBC). The open-circuit case is P2C2A, the high case P2C2C. Since valve position can no longer be confirmed, boost is typically reduced.
Possible causes
- Signal wire of the position sensor shorted to ground high
- Missing 5 V reference at the sensor medium
- Position sensor in the valve actuator failed low medium
Symptoms
- Check engine light
- Reduced boost pressure
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P2C2B
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.