OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2C2A

Turbocharger/Supercharger Bypass Valve B Position Sensor Circuit/Open

P2C2A covers an open or otherwise unreadable position feedback from compressor bypass valve B, the electrically positioned recirculation valve of the second charger. Without a valid feedback the engine module cannot confirm how far the valve has opened, which an Achates Power patent names as the reason such sensors are monitored. No manufacturer documents P2C2A publicly. GM's 2019 tables describe the A-side sensor of the supercharged LT5 as a ratiometric signal relative to the 5 V reference, but publish only its low and high codes P2BBC/P2BBD. GM defines charger A as bank 1 in parallel layouts and first in exhaust flow in series layouts, so B is the other one. Wiring and connectors near the hot charger are the usual suspects; boost is often limited.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / numberC / 2A

Possible causes

  • Unplugged, loose or corroded connector at valve B high
  • Broken signal, reference or ground wire of the sensor medium
  • Internal open in the position sensor of the actuator medium

Symptoms

  • Check engine light
  • Boost limited, less power

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P2C2A

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication