P2C29
Turbocharger/Supercharger Bypass Valve B Stuck
Bypass valve B is the compressor recirculation valve of the second charger – the later one in series layouts, the bank 2 unit on parallel twin-turbo engines. It is not the wastegate. P2C29 means a position-controlled valve no longer follows its target and stays where it is. No manufacturer documents P2C29 publicly. The A-side twin P23AA shows the method on GM's 2019 Corvette LT5: a position error above 25 % lasting at least 1 s while the valve barely moves (under 10 %/s), 10 of 14 samples, Type A. GM's 2019 CT6 4.2L twin-turbo, by contrast, uses switched dump valves without a sensor for both banks and reports a sticking valve B as P00C4. Stuck closed causes surge noise on lift-off; stuck open costs boost.
Possible causes
- Oil or carbon deposits binding the valve flap or piston high
- Worn gears or motor in the electric actuator medium
- Bent shaft or damaged housing of the valve low
Symptoms
- Check engine light
- Less boost and power
- Fluttering compressor noise when lifting off
Inspection / repair
- Difficulty: hard
- DIY: shop recommended
What Pro shows you for P2C29
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.