P2C26
Fuel Injector Group B Supply Sense Circuit
Many engines feed their injectors in groups from a switched supply, for example through an injector relay or a high-side driver. A separate sense line lets the engine module read back whether voltage really arrives at group B. P2C26 is the general fault of that read-back: the sensed value is missing, erratic or not consistent with the commanded supply state. It differs from P2149–P2151, which concern the supply path of group B itself. No publicly accessible manufacturer document explains P2C26; the code rests on CARB's comprehensive component rules. GM's injector logic on the Saab 9-5 2.0T shows the general pattern for supply faults: an incorrect voltage for over 1 s with the engine above 80 rpm sets a Type B code and the injector is shut off. Misfire is possible.
Possible causes
- Open or high-resistance sense wire between injector supply and module high
- Injector relay or its socket making poor contact medium
- Corroded connector in the injector supply harness medium
- Faulty sense input inside the engine control module low
Symptoms
- Check engine light
- Possible misfire or rough running on the cylinders of group B
- Hard starting if the group is switched off
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P2C26
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.