P2C23
Exhaust Heat Exchanger Exhaust Bypass Valve A Position Sensor Performance
P2C23 means the flap position reported for exhaust heat exchanger bypass valve A is electrically valid but does not make sense – for example it disagrees with the command or with how the coolant behind the exchanger warms up. A Ford patent shows that such plausibility can be judged from temperatures. Ford documents P2C23 on several full hybrids: SSM 49531 notes it on 2021 F-150 PowerBoost trucks at or below freezing, TSB 21-2053 reprograms the PCM on trucks built up to 15 February 2021, and SSM 52543 (F-150, Explorer 3.3L, Escape 2.5L, Maverick, up to 2024) first checks the connectors of exhaust coolant temperature sensors 3 and 4 for water and corrosion before the heat exchanger is condemned. Driving is unaffected; the MIL is on.
Possible causes
- Water or corrosion in the connectors of exhaust coolant temperature sensors 3/4 (Ford) high
- Outdated PCM calibration (early 2021 F-150 PowerBoost) medium
- Worn, sticking or frozen bypass actuator medium
- Flap or linkage in the heat exchanger binding low
Symptoms
- Check engine light, often after frost
- No noticeable change in driving
- Heater warms up more slowly
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P2C23
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.