OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2C1B

B Camshaft Profile Actuator Position Sensor C Range/Performance Bank 1

Range/Performance for exhaust position sensor C, bank 1: the signal is electrically fine but does not match the commanded pin movement of a third exhaust profile actuator. There is no public manufacturer documentation for P2C1B. The comparable test on GM's L3B (P2C13, P2C17) watches three Hall states per shift and also catches pin activity without a command; GM's engine has no third exhaust feedback, so the code stays unused there. CARB explicitly expects valve lift diagnostics to detect a single pin that does not reach its intended position, which is what such a code would cover. Mechanical causes such as a sticking pin, heavy oil sludge or a damaged sleeve groove would be more likely than wiring. Driving effect: lamp on, exhaust profile frozen.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / numberC / 1B

Possible causes

  • Actuator pin sticking or reacting too slowly high
  • Sludge or wrong oil viscosity in the valve train medium
  • Position sensor reporting implausible levels low

Symptoms

  • Warning lamp on
  • Exhaust lift held on one profile, possibly ticking from the head

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P2C1B

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication