OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2C1A

B Camshaft Profile Actuator Position Sensor C Circuit Bank 1

P2C1A would report an open circuit in a third position feedback on the bank 1 exhaust camshaft. No manufacturer documents this code publicly. GM's L3B, the one engine with publicly documented exhaust feedback codes, has just two exhaust Hall sensors (P2C12 to P2C19), in line with the two exhaust profile actuators that GM TechLink describes; its 2019 and 2025 tables contain no P2C1A. A system with a third exhaust actuator would test it as with the analogous code P2C16: an energised driver and a very high signal-to-ground impedance pointing to a broken wire. CARB requires such sensors and actuators of a valve lift system to be monitored for circuit faults. Expect a warning lamp and a locked exhaust lift profile.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / numberC / 1A

Possible causes

  • Disconnected or corroded plug at the third exhaust actuator high
  • Broken feedback wire in the engine harness medium
  • Internal open in the position sensor low

Symptoms

  • Engine warning lamp on
  • Exhaust cam profile switching locked out

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P2C1A

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication