P2C15
B Camshaft Profile Actuator Position Sensor A Circuit High Bank 1
P2C15 stands for a short to voltage on the exhaust position sensor A circuit, bank 1, i.e. the Hall feedback of GM's first exhaust actuator on the L3B four. This test runs with the output switched off: if a resistance of 0.5 ohm or less to controller power remains on the line, four failed reports in five at more than 11 V produce a Type A code, MIL at once (19OBDG03D, 25OBDG03B). P2C15 belongs to the main code list of PIT5677 and of 21-NA-149 for 2019 to 2021 L3B trucks. From the A revision on, these bulletins also mention blown underhood fuses alongside no-start, rough running and reduced power, so a short to power is often only one symptom of a larger harness fault. Exhaust lift changes stop. Open: P2C12, ground short: P2C14.
Possible causes
- Chafed harness letting the sensor line touch a supply wire (GM PIT5677, 21-NA-149) high
- Short to supply inside exhaust actuator 1 medium
- Defective output stage in the ECM low
Symptoms
- MIL lit straight away
- Exhaust cam profile stays fixed
- Together with harness damage, blown fuses, no start or reduced power possible
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P2C15
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.