P2C12
B Camshaft Profile Actuator Position Sensor A Circuit Bank 1
Camshaft B is the exhaust camshaft in J2012 terms, and P2C12 reports an open circuit in the feedback of its first profile actuator on bank 1. GM's 2.7 L turbo L3B (Silverado and Sierra 1500 from model year 2019) is the documented user: its tables call this element exhaust Hall sensor 1. With the driver energised, the ECM flags a break once the signal-to-ground impedance reaches 200 kilohms or more; four failures out of five samples at system voltage above 11 V give a Type A code, MIL on trip one (19OBDG03D, 25OBDG03B). P2C12 is in the main DTC list of PIT5677 and its successor 21-NA-149, which point to engine harness damage at the camshaft carrier cover. Exhaust lift changes are then suspended. Low and high: P2C14, P2C15.
Possible causes
- Engine harness worn through where it crosses the camshaft carrier cover (GM PIT5677, 21-NA-149) high
- Connector on exhaust actuator 1 not latched or corroded medium
- Open Hall element inside the exhaust actuator low
Symptoms
- Check engine light from the first trip
- Exhaust cam profile no longer switched, fuel economy mode unavailable
- With harness damage, several other engine codes at the same time
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P2C12
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.