P2C0C
A Camshaft Profile Actuator Position Sensor B Circuit High Bank 1
A short from the sensor B line to a voltage source triggers P2C0C. The sensor is the Hall feedback built into the second intake profile actuator on bank 1. For the L3B four in 2019 and later Silverado and Sierra 1500 trucks, GM tests with the output stage off; a reading of no more than 0.5 ohm against controller power, found four times in five checks while the supply exceeds 11 V and the key is in crank or run, gives a Type A code with MIL in the first trip (19OBDG03D, 25OBDG03B). Bulletins PIT5677 and 21-NA-149 include P2C0C in their main list for harness chafing at the camshaft carrier, the air cleaner housing and the left shock tower, where blown fuses can accompany the codes. An actuator whose position cannot be read is excluded from shifting. Ground short: P2C0B, open: P2C09.
Possible causes
- Chafed harness bringing the line against a powered wire (GM PIT5677, 21-NA-149) high
- Internal short to supply in actuator 2 medium
- ECM output stage defective low
Symptoms
- MIL on in the first trip
- Cam profile switching and cylinder deactivation unavailable
- With harness damage, further codes, rough running or no start
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P2C0C
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.