OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2C00

Fuel Pressure Regulator C Performance

P2C00 reports that a third fuel pressure regulator, labelled C, cannot hold the pressure the engine module asks for, although its circuit tests fine. Letters beyond A and B are only needed on fuel systems with several pressure control elements, for example engines with two high-pressure pumps or separate control of low and high pressure. No manufacturer documents P2C00 publicly; regulator C's electrical faults have their own codes P233A to P233C. As a comparable performance check, GM's 2023 table 23OBDG07 watches the high-pressure controller output for its first and second quantity control valves (P0089, P2C01) and flags a fault when it stays beyond plus or minus 7.5 MPa for 10 seconds, on two trips. CARB requires fuel system and pressure control parts to be checked for proper function.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / numberC / 00

Possible causes

  • Regulator C or the pump it controls worn or sticking medium
  • Insufficient feed pressure to the controlled pump medium
  • Fuel pressure sensor drifting, so the regulator appears off target low

Symptoms

  • Check engine light on
  • Reduced power at high load
  • Extended cranking

Inspection / repair

  • Difficulty: hard
  • DIY: shop recommended

What Pro shows you for P2C00

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 4 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication