OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2BFC

Exhaust Flow Control Valve B Position Circuit

P2BFC covers a general fault in the feedback path that tells the engine computer where exhaust flap B is. It applies only to systems with a second position-monitored flap, such as one per tailpipe, so on single-flap vehicles it cannot occur. No manufacturer documents P2BFC in public material. Ford defines valve B as its bank 2 flap and reads its state through the smart driver's PWM line; GM's 23OBDG07 tables supervise the PWM feedback of two exhaust valves, but under GM-specific codes with duty cycle limits of 2 and 98 percent over 4 seconds. CARB requires circuit monitoring for such inputs. In practice, compare the B side with the A side: if only B fails, look at its connector and wiring first, since the actuators are usually identical.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / numberB / FC

Possible causes

  • Flap B connector loose, wet or corroded high
  • Feedback wire to flap B broken or heat-damaged medium
  • Position sensing in actuator B failed medium

Symptoms

  • Check engine light on
  • Exhaust mode selection limited or unavailable

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P2BFC

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 2 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication