P2BFA
Exhaust Flow Control Valve B Control Circuit High
P2BFA reports too high a level on the control line of exhaust flap B. Either the wire has contact with a powered circuit, or the actuator electronics feed voltage back, so the driver cannot pull the line down when it should. Ford's 2024 OBD summary lists it as subtype 12 of the bank 2 check, monitored continuously with a 5 second window. GM's 23OBDG07 tables describe a short to power on the exhaust valve PWM control circuit, enabled above 9 V battery voltage, failing after 4 seconds and lighting the MIL after two trips. Ford bulletin 25-2146 for the 2018-2023 Mustang and 2020-2022 Shelby GT500 groups P2BFA with the other flap codes and directs an inspection of the tailpipe actuator harness. A flap B that keeps moving although commanded otherwise fits this fault better than P2BF9.
Possible causes
- Control wire shorted to a powered circuit high
- Flap B actuator electronics feeding voltage back medium
- Damaged tailpipe actuator harness, Ford service part 14A411 low
Symptoms
- Check engine light on
- Exhaust mode warning in the cluster
- Bank 2 flap in wrong position for the selected mode
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P2BFA
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 2 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.