P2BF9
Exhaust Flow Control Valve B Control Circuit Low
With P2BF9 the control line of exhaust flap B is pulled toward ground. A bare spot rubbing on the body or exhaust, or a shorted actuator, is the classic cause, which is why the code tends to appear after exhaust work or with a sagging harness. Ford's 2024 OBD summary treats it as subtype 11 of the bank 2 flap check, run continuously over 5 seconds by the smart driver. GM's 24OBDG07 tables describe a ground short on the exhaust valve PWM control circuit with battery voltage above 9 V, 4 seconds and a two-trip MIL. Ford bulletin 21-2011 for the 2020 Mustang GT500 lists P2BF9 among the active exhaust codes and points to pinched wiring at the actuator mount. Compared with P2BF8, the circuit is intact but shorted, so check insulation along the whole run rather than continuity alone.
Possible causes
- Control wire chafed through and touching ground high
- Harness pinched at the actuator bracket medium
- Internal short in the flap B actuator medium
Symptoms
- Check engine light on
- Exhaust mode cannot be changed
- Bank 2 flap stuck, uneven sound left and right
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P2BF9
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 2 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.