OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2BF8

Exhaust Flow Control Valve B Control Circuit/Open

Valve B is the second exhaust flap; Ford's gasoline OBD summaries 2020-2024 put it on bank 2, while valve A (P26C5) serves bank 1. P2BF8 reports that the drive circuit for flap B is open or unusable. On Ford a smart driver checks the output continuously and flags it within about 5 seconds; the 2024 summary files the open circuit as subtype 13. GM's 2023 and 2024 OBD tables (23OBDG07, 24OBDG07) watch the PWM control line of an exhaust valve the same way: open circuit, battery above 9 V, 4 seconds, two trips to the MIL. Ford names P2BF8 in its Mustang active exhaust bulletins, and 25-2144 for F-150 trucks with the 5.2 L engine, model years 2023 to 2025, lists P2BF8:78, an actuator that fails alignment, which a PCM update and relearn resolve. A broken wire or unplugged actuator is the usual find.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / numberB / F8

Possible causes

  • Broken or unplugged harness to the bank 2 flap actuator high
  • Open circuit inside the flap actuator medium
  • Actuator not aligned after replacement or outdated PCM software (subtype 78) medium

Symptoms

  • Check engine light on
  • Exhaust mode not available message
  • One tailpipe flap no longer moves

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P2BF8

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 2 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication