OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2BF2

Fuel Control System B Too Lean Bank 2

P2BF2 combines two restrictions: the lean correction is on bank 2, and it only occurs in the port injection mode that Ford designates fuel system B. The Ford threshold is identical to the other trim codes of this family, more than 25 percent added by long-term trim plus over 1 percent by short-term trim for 2 seconds. Using both letters and both banks together helps the diagnosis. A lean result on bank 2 alone in PFI mode suggests a port injector or an intake leak on that side; lean on both banks in PFI mode (P2BF0 and P2BF2) points to the shared low-pressure supply; lean in every mode is P0174. On the 2019 to 2021 F-150 with the 5.0 L V8, bulletin 22-2393 treats this code with a PCM reflash and a keep-alive memory reset.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / numberB / F2

Possible causes

  • PCM software, Ford reprogramming bulletins medium
  • Port injector on bank 2 clogged medium
  • Air leak at the bank 2 intake gasket or injector O-ring medium
  • Weak low-pressure supply, usually with P2BF0 as well low

Symptoms

  • Check engine light on
  • Uneven idle
  • Mild hesitation at part throttle

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P2BF2

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication