P2BF1
Fuel Control System B Too Rich Bank 1
With P2BF1 the PCM has seen bank 1 too rich while fuel came through the port injectors, Ford's fuel system B. Ford flags it when the long-term value sits beyond minus 25 percent and the short-term value still takes away above 1 percent, for a 2 second window in closed loop. Since this monitor only runs with the canister purge valve closed, vapour from the evaporative system cannot explain the result; the excess fuel comes from the injection side or from a wrong air reading. Typical findings are a port injector that leaks into the intake runner, too much low-side fuel pressure or a mass air flow signal that reads low. If the rich condition is present in DI mode too, Ford stores P0172 instead. Ford names P2BF1 in its F-150 reflash bulletins for the 2.7 L and 5.0 L engines.
Possible causes
- Port injector on bank 1 leaking or dribbling medium
- PCM software, Ford reprogramming bulletins medium
- Low-side fuel pressure above specification low
- Mass air flow sensor under-reporting low
Symptoms
- Check engine light on
- Fuel smell, black exhaust deposits
- Rough idle when warm
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P2BF1
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.