P2BEA
Hybrid/EV Battery Precharge Contactor Control Circuit B Low
P2BEA is stored when control circuit B of the precharge function carries less voltage than its state requires, mostly because the coil feed touches ground or the output is pulled down. With a high-side driver the coil then gets no current and the second precharge path stays open. No manufacturer documents P2BEA publicly. GM's 2016 test of the contactor A equivalent (P0AE6) checks the driver output while it is commanded on and fails below 5.35 V, 13 of 16 samples at 12.5 ms, Type B, two trips, with the 12 V supply above 10.2 V. GM also notes that its open test cannot see a short to ground, which is why this case has its own code. CARB requires circuit checks on hybrid outputs. The high side is P2BEB.
Possible causes
- Coil feed chafed and shorted to ground high
- Coil of precharge contactor B shorted internally medium
- Driver stage of the battery controller pulled low low
Symptoms
- Vehicle does not become ready to drive
- MIL and hybrid or EV warning on
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P2BEA
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.