P2BE9
Hybrid/EV Battery Precharge Contactor Control Circuit B Range/Performance
P2BE9 says control circuit B of the precharge function is connected but behaves implausibly: the coil current, the feedback voltage or the effect of switching does not match the command. No manufacturer documents P2BE9 publicly. A Ford patent shows why the result of precharge matters for a second path: if the main contactor stays welded, the controller switches precharge to the resistor bridging the return-side contactor, and it must then confirm that the bus voltage actually rises. GM judges the outcome of precharge separately (P0C78): in its 2019 tables the bus must reach 95 to 105 % of pack voltage within 0.7 s, Type A. CARB demands functional checks of hybrid outputs. Open, low and high are P2BE8, P2BEA and P2BEB.
Possible causes
- Coil resistance out of tolerance or sluggish armature medium
- High-voltage load or resistor fault keeping the bus from rising during precharge medium
- Corrosion or high resistance in the control circuit medium
- Battery controller software or driver stage low
Symptoms
- Vehicle sometimes does not become ready
- MIL and hybrid or EV warning on
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P2BE9
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 4 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.