P2BE8
Hybrid/EV Battery Precharge Contactor Control Circuit B Open
P2BE8 reports an open in control circuit B of the battery precharge function, i.e. the coil drive of a second precharge contactor. Note the wording: the letter follows circuit, while the A codes P0AE4 to P0AE7 name contactor A. Such a second path exists, for example, in a Ford patent with one precharge resistor and switch on the positive side and another on the return side, so precharge still works if one main contactor is welded. No manufacturer documents P2BE8 publicly. GM's test for contactor A (P0AE4, 2019) shows the method: with the driver on, a coil current under 194 mA means open, 40 of 50 samples at 12.5 ms, Type B. CARB requires circuit checks of hybrid outputs. Without precharge the vehicle normally does not become ready.
Possible causes
- Open control wire or loose connector at contactor B high
- Coil of precharge contactor B open internally medium
- Driver stage in the battery controller defective low
Symptoms
- Vehicle does not become ready to drive
- MIL and hybrid or EV warning on
- Charging not possible
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P2BE8
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.