P2BE5
Hybrid/EV Battery Pack Current Sensor C Circuit Range/Performance
P2BE5 flags current sensor C as implausible although its signal is electrically valid, for instance an offset with no current flowing or a value at odds with the other readings. Stellantis lists it, worded as current sensor C circuit performance, in bulletins 08-047-20 and 08-130-21 for the 2017-18 Chrysler Pacifica plug-in hybrid with the 3.6 litre engine: the MIL comes on, and the remedy is new software for the battery pack control module, not a new sensor. GM shows how two current readings are cross-checked: in its 2019 table P0B13 fails when sensors A and B differ by more than 10 A while both lie between -20 and 20 A, 400 of 500 samples at 25 ms, Type A. CARB demands rationality checks for hybrid inputs. Wrong current corrupts the charge estimate; circuit faults are P2BE4, P2BE6 and P2BE7.
Possible causes
- Battery controller software (Stellantis Pacifica PHEV, reflash per bulletin) high
- Sensor offset or gain drift medium
- High resistance at connector or sensor ground low
Symptoms
- MIL on
- Hybrid system warning
- Inaccurate state of charge or reduced electric range
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P2BE5
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 4 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.