P2BE2
Hybrid/EV Battery Coolant Level Sensor Circuit Low
P2BE2 is stored when the voltage from the battery coolant level sensor falls below the lowest value the sensor can legitimately produce. That points to the signal touching ground or a sensor whose output collapses, not to a low coolant level, which normally reads inside the valid range. No manufacturer documents P2BE2 publicly. On the Chevrolet Volt GM uses its own code P1FFC for this case: below 1.37 V with the 12 V system above 10.2 V, 40 of 50 samples at 100 ms, Type A and MIL on the first trip. CARB requires out-of-range checks for such inputs. Because the controller no longer knows the level, it may restrict charging or hybrid operation. Open and high faults are P2BE0 and P2BE3.
Possible causes
- Signal wire chafed through and shorted to ground high
- Level sensor output stuck low medium
- Sensor supply missing (connector, corrosion) medium
Symptoms
- Hybrid system warning
- MIL on
- Charging possibly disabled
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P2BE2
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.