P2BE0
Hybrid/EV Battery Coolant Level Sensor Circuit/Open
P2BE0 concerns the wiring of the level sensor in the coolant reservoir of the high-voltage battery loop: its signal is missing or the line is broken. Stellantis documents the code as P2BE0-00 on the 2021-22 Chrysler Pacifica Hybrid, where the cluster asks for hybrid system service; Tech Tip 9004552 tells dealers to photograph the level in the battery coolant bottle before swapping sensor or bottle, so the real level is part of the diagnosis. GM watches the same part on the Chevrolet Volt under its own codes P1FFB to P1FFF; there an open line drives the signal above 4.0 V, 40 of 50 samples at 100 ms, Type A. Plausibility, low and high faults are P2BE1 to P2BE3. Expect a hybrid warning and possibly blocked charging.
Possible causes
- Battery coolant level actually low (leak or after service), bulletin asks to check first high
- Level sensor defective, e.g. internal solder joints (GM Volt) medium
- Open signal wire or loose connector at the reservoir medium
- Internal break in the sensor jumper harness low
Symptoms
- Service hybrid system message on the cluster
- MIL on
- Plug-in charging disabled on some models
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P2BE0
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.