P2BDF
Motor Electronics Coolant Temperature Sensor C Circuit High
P2BDF is stored when the signal of coolant temperature sensor C climbs to nearly the full reference voltage. For the module this looks like coolant colder than any climate allows; in practice a pin that has backed out of the connector, a corroded or broken signal wire, or a short to a voltage source is behind it. No manufacturer documents P2BDF publicly. GM sets the matching code for its single electronics coolant sensor, P0CF1, above 98 % of the 5 V reference (4.9 V): 16 of 20 samples at 250 ms in the 2011 Volt tables, 4 s within a 5 s window in the 2019 tables, Type B in both. CARB requires out-of-range checks on all inverter cooling inputs. The low counterpart is P2BDE, sensor B uses P2BDB. A warning lamp and reduced power are possible.
Possible causes
- Backed-out or loose pin in the sensor C connector high
- Corroded or broken signal wire of sensor C medium
- Open circuit inside sensor C medium
- Signal wire shorted to the 5 V reference or another supply low
Symptoms
- Check engine or hybrid system warning
- Live data shows the lowest possible temperature for sensor C
- Pump and fan running in a fixed protective mode
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P2BDF
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.