OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2BDD

Motor Electronics Coolant Temperature Sensor C Circuit Range/Performance

P2BDD is the plausibility check of coolant temperature sensor C: electrically the signal looks fine, but the reported value cannot be right when set against other temperatures. No manufacturer documents P2BDD publicly. Two published approaches show how such a check can run while driving instead of after a cold soak. GM's 2011 Volt compares its electronics coolant sensor with the high-voltage charger temperature and flags a gap above 38 °C while the inverter module requests pump operation, or 40 °C otherwise, in 32 of 40 samples at 250 ms, Type B. A Nissan patent compares the inverter power element temperature with the coolant reading and applies a tighter limit when the element appears colder than the water, which physics rules out. Hard faults of sensor C are P2BDE and P2BDF.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / numberB / DD

Possible causes

  • Sensor C reading drifted away from the true coolant temperature high
  • Air or weak flow at the sensor C location, so it sees a local hot or cold spot medium
  • Corroded terminals adding resistance in the sensor C circuit medium
  • Faulty comparison temperature from another sensor in the system low

Symptoms

  • Check engine light without an obvious drivability problem
  • Cooling fan behaviour that does not match the conditions
  • Power or charging limitation under heavy load

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P2BDD

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 4 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication