P2BDC
Motor Electronics Coolant Temperature Sensor C Circuit
P2BDC reports a general fault in the circuit of coolant temperature sensor C, a third measuring point that some drives use in the loop cooling the inverter, converter and motor. The code stands for a signal the module cannot use without assigning it to the low, high or plausibility codes P2BDE, P2BDF and P2BDD. No manufacturer documents P2BDC, or a third sensor of this kind, publicly. As a guide to what such a module accepts as a valid signal, GM's 2011 Volt tables keep their single electronics coolant sensor between 2 % and 98 % of the 5 V reference and treat an exit from that window in 16 out of 20 readings, one every 250 ms, as a Type B fault. CARB requires circuit checks on these inputs. Without the value, cooling falls back to safe defaults.
Possible causes
- Poor contact at the sensor C connector high
- Chafed or broken wiring between sensor C and the module medium
- Defective sensor C medium
- Fault on a 5 V reference or sensor ground shared with other sensors low
Symptoms
- Warning lamp for the hybrid or drive system
- Fan and electronics pump running at high output as a precaution
- Possibly reduced electric power
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P2BDC
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.