OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2BDA

Motor Electronics Coolant Temperature Sensor B Circuit Low

P2BDA is set when the sensor B signal in the electronics coolant loop falls below its valid window. These sensors are normally NTC thermistors, so a low voltage translates into an impossibly hot reading; a signal wire touching ground or a shorted sensor is the classic cause. No manufacturer documents P2BDA publicly. On sensor A of GM's 2013 Two-Mode hybrid trucks, the low fault P0A02 sets when the converted value reaches 162.1 °C in 30 of 50 samples taken every 100 ms, after propulsion has been active for more than 10 s; it is Type B. CARB requires such inputs to be tested against their valid limits. The opposite fault is P2BDB. The system may cut power because it believes the electronics are overheating.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / numberB / DA

Possible causes

  • Signal wire of sensor B shorted to ground high
  • Internally shorted sensor B medium
  • Moisture in the sensor connector creating a leakage path to ground medium
  • Faulty input stage in the evaluating module low

Symptoms

  • Check engine light and hybrid system warning
  • Scan tool shows an implausibly high electronics coolant temperature
  • Power reduction even with a cold vehicle

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P2BDA

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication