OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2BD9

Motor Electronics Coolant Temperature Sensor B Circuit Range/Performance

P2BD9 means coolant temperature sensor B in the motor electronics loop delivers a voltage inside its electrical window, yet the temperature it reports does not fit the rest of the vehicle. The circuit itself is intact; a drifting thermistor, a sensor sitting in an air pocket or a value that stays frozen are typical. No manufacturer documents P2BD9 publicly. GM's method for sensor A on the 2013 Two-Mode hybrid trucks, P0A01, shows the principle: after the vehicle has rested for over 28,800 s, the loop temperature at power-up may differ from engine coolant temperature by no more than 30 °C, provided engine coolant and intake air agree within 15.75 °C; a failure counts as Type B. Voltages outside the window for this sensor are reported as P2BDA and P2BDB; sensor C has its own check, P2BDD.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / numberB / D9

Possible causes

  • Sensor B thermistor drifted out of its characteristic high
  • Air pocket or low coolant leaving sensor B partly dry medium
  • Added resistance from corroded terminals shifting the reading medium
  • Wrong value from a comparison sensor such as engine coolant or intake air temperature low

Symptoms

  • Check engine light, usually without a noticeable driving issue at first
  • Cooling fan or electronics pump running at unexpected times
  • Occasional power limitation on hot days

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P2BD9

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 4 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication