OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2BD7

Motor Electronics Coolant Pump C Control Performance

P2BD7 means pump C in the motor electronics cooling loop is electrically reachable but does not deliver what the controller asks for: wrong speed, a fault report from the pump itself or too little cooling effect. No manufacturer documents P2BD7 publicly. Ford's 2019 hybrids judge pump A this way under P0C73, set once the pump has reported a confirmed internal fault for more than 1.25 s. GM's ELR infers weak flow under P0CEA by comparing loop and charger temperatures with the pump above 30 % speed, needing 32 failed readings out of 40 taken every 250 ms, Type B. For pump B, Stellantis cured P0C74 on 2024 Renegade 4xe models with new hybrid controller software (TSB 08-193-24). Air in the loop, low coolant and a worn pump are typical; drive power is limited.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / numberB / D7

Possible causes

  • Air trapped in the electronics loop after a repair or coolant loss high
  • Low coolant level in the electronics loop reservoir medium
  • Worn, sticking or debris-blocked pump C medium
  • Outdated software in the hybrid controller that misjudges the pump low

Symptoms

  • Check engine or hybrid warning light
  • Cooling fan running at high speed more often than usual
  • Reduced electric drive or charging power when the loop gets warm

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P2BD7

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 4 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication