OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2BD4

Motor Electronics Coolant Pump C Control Circuit/Open

Hybrid and electric drives cool the inverter, DC/DC converter and motor with one or more electric pumps; J2012 labels them A, B and C. P2BD4 means the controlling module has found an open circuit or an unclassified fault on the control line of pump C. No manufacturer documents P2BD4, or a third pump of this kind, publicly. Comparable checks exist for pump A: Ford's 2019 hybrid summary sets P0A05 when no reply arrives from the pump for more than 9.25 s with 6–19 V on the system, and GM's 2016 tables for the Cadillac ELR flag P0CE9 for an open or shorted pump control line in 16 of 20 samples at 250 ms, Type B. CARB requires the electronic parts of inverter cooling to be monitored. Low and high faults of pump C are P2BD5 and P2BD6. Overheating electronics lead to reduced drive power.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / numberB / D4

Possible causes

  • Unplugged, loose or corroded connector at pump C high
  • Broken control or signal wire between module and pump medium
  • Failed electronics inside the pump medium
  • Faulty output or input stage in the controlling module low

Symptoms

  • Hybrid or drive system warning, often with the check engine light
  • Reduced drive power when the electronics heat up
  • Pump C silent during an actuator test

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P2BD4

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication