P2BD2
Exhaust Aftertreatment System A Leak
P2BD2 reports that the first aftertreatment line, or the only one, is not gas-tight, so exhaust escapes between engine and tailpipe or false air enters. A leak upstream of the catalysts lets untreated NOx and soot out and also confuses sensors: Foton Cummins patented a check that compares the measured aftertreatment pressure with a model value from exhaust back pressure and flags a leak beyond a limit, noting that leaks also cause urea crystals and false NOx efficiency faults. Ford describes telling a leak near the particulate filter apart from a slow catalyst sensor. CARB is studying how much such unfiltered leaks add to truck emissions. No maker documents P2BD2 publicly; P2BD3 covers system B. The driver may notice exhaust smell, ticking noises and the MIL.
Possible causes
- Loose V-band clamp or failed gasket between aftertreatment modules high
- Cracked exhaust pipe, flex joint or catalyst housing medium
- Leak at a sensor, DEF injector or pressure tap mounting medium
- Pressure sensor hose cracked, making the system look leaky low
Symptoms
- MIL on
- Exhaust smell, soot marks or ticking at a joint
- Follow-up SCR or particulate filter codes
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P2BD2
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.