P2BD0
Battery Charging System Negative Contactor B Control Circuit Low
With P2BD0 the coil drive line of minus-side charging contactor B is too low – usually insulation damage letting the wire touch the body, or an output stage stuck low. Starved of current, the coil leaves the return path of that charging branch open. No manufacturer documents P2BD0 publicly. GM states that its open-circuit test (P0D11) on the Volt and ELR minus contactor A cannot see a short to ground, so that case has to be caught elsewhere. CARB obliges makers of plug-in vehicles to check this hardware. Look for chafed wiring along the battery tray or underbody, moisture in connectors and an internally shorted coil. The high counterpart is P2BD1, the plus side P2BC9, the contactor A twin P0D13. The vehicle will normally not charge in that mode.
Possible causes
- Control wire of negative contactor B shorted to ground high
- Moisture in a connector of the control line medium
- Coil of negative contactor B internally shorted low
Symptoms
- Charging session will not start
- Charging fault message
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P2BD0
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.