OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2BCF

Battery Charging System Negative Contactor B Control Circuit Range/Performance

P2BCF points to a control circuit on negative charging contactor B that is neither open nor shorted yet still implausible: coil current, line voltage or switching time fall outside the window that belongs to the commanded state. No manufacturer documents P2BCF publicly, and no published GM table has such a check for a charging contactor coil. CARB asks for rationality checks in addition to circuit checks on plug-in charging components. GM's patent on diagnosing the battery disconnect unit shows the kind of evidence available: how the coil current rises after a brief pulse, held against a stored profile, separates a healthy contactor from a sluggish one. A shifted coil resistance, corrosion in the connector and a poor module ground are typical. Opens are P2BCE, low and high P2BD0/P2BD1, the plus side P2BC8.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / numberB / CF

Possible causes

  • Coil resistance of negative contactor B shifted medium
  • Corrosion or contact resistance in the control connector high
  • Poor ground of the controlling module low

Symptoms

  • Charging drops out or will not begin
  • Charging fault message from time to time

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for P2BCF

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication