OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2BCE

Battery Charging System Negative Contactor B Control Circuit/Open

P2BCE watches the coil drive of negative charging contactor B for an open line or a driver whose real state differs from its command. No manufacturer documents P2BCE publicly. The closest published test is GM's P0D11 for minus contactor A in the Volt and the ELR: an output above 4 V with the driver off, a voltage close to supply, or a coil current under 57 mA with the driver on all count as faults, and the status of the charging high-voltage interlock belongs to the enable conditions; GM rates it Type A. CARB makes such charging-circuit checks mandatory for plug-in models. Broken wires near the battery, pushed-back terminals and an open coil top the list. Range/performance, low and high are P2BCF–P2BD1, the plus side P2BC7. Without its return contactor that charging mode is lost.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / numberB / CE

Possible causes

  • Control wire or terminal of negative contactor B open high
  • Coil of negative contactor B open medium
  • Driver stage in the module defective low

Symptoms

  • Charging via the contactor B path not possible
  • Charging fault indication

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for P2BCE

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication