OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2BCB

Battery Charging System Negative Contactor B Circuit

P2BCB is the general electrical code for negative contactor B of the charging system, which closes the return path of the second charging branch to the traction battery. No manufacturer documents P2BCB publicly. Where B serves DC fast charging, each pole usually has its own contactor so the inlet is isolated from the pack whenever no charger is connected; a Hyundai patent on quick-charge relays tests the plus and minus relay one after the other for exactly that reason. A Ford patent swaps the order in which the two charger contactors close from one session to the next and checks the last one closed for welding first. CARB requires monitoring of charging components on plug-in vehicles. Stuck closed and open are P2BCC/P2BCD, driver faults P2BCE–P2BD1, the plus side P2BC4, contactor A minus P0D0E.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / numberB / CB

Possible causes

  • Coil of negative contactor B open or shorted medium
  • Wiring or connector fault on the return-side contactor medium
  • Fault in the module that drives contactor B low

Symptoms

  • Charging in the affected mode refused
  • Charging fault message
  • Driving usually still possible

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for P2BCB

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication