P2BC8
Battery Charging System Positive Contactor B Control Circuit Range/Performance
P2BC8 flags a control circuit of positive charging contactor B that is connected but behaves implausibly: the coil draws a current that does not fit the command, the line voltage lies in an unexpected band, or pulling in takes too long. No manufacturer documents P2BC8 publicly. CARB demands rationality checks in addition to circuit checks for the charging components of plug-in vehicles. A GM patent explains one way to judge a coil: send a short pulse, record the current response and compare it with stored values, which reveals a winding or armature that no longer behaves as designed. Likely culprits are corrosion at the pins, a coil with drifting resistance and an ageing output stage. Opens are P2BC7, hard low or high readings P2BC9/P2BCA, the contactor A equivalent P0D0B. Charging may work only intermittently.
Possible causes
- Contact resistance at connectors of the control line high
- Coil resistance of contactor B outside specification medium
- Driver stage in the module degraded low
Symptoms
- Charging works only now and then
- Charging aborts with a fault message
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P2BC8
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.