P2BC3
Charge Air Cooler Coolant Pump A Control Module Overtemperature
The control electronics of an electric coolant pump sit inside the pump body and are cooled by the liquid flowing through it. P2BC3 means the electronics of charge air cooler pump A report a temperature above their limit. Far more often than a defective board, the reason is a low coolant level, air trapped in the pump after service, a partly blocked impeller drawing extra current, or a mounting spot exposed to engine heat. No manufacturer documents P2BC3 publicly. Ford's 2019 hybrid OBD summary shows how such a check works on its LIN-connected engine coolant pump (P26D2): the pump sends its module temperature and the PCM flags a value above 130 °C; the 2024 summary lists the same overtemperature type for the auxiliary pumps. The pump then derates or stops, and charge air temperature rises.
Possible causes
- Low coolant level or air trapped in the low-temperature loop high
- Partly blocked impeller or worn bearing raising motor current medium
- Fault in the pump's integrated electronics medium
- Missing heat shield or pump placed close to hot engine parts low
Symptoms
- Check engine light or engine warning message
- Pump runs slower or switches off, especially in hot weather
- Hot charge air and reduced power
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P2BC3
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 4 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.